Advanced software function (SW40+) for unlocking RFA EVA 2 modules on the latest Jaguar and Land Rover vehicles. Exclusive to the HW04-C+ Master Kit.
Understanding the latest generation RFA module technology
EVA (Electronic Vehicle Architecture) 2 is Jaguar Land Rover's next-generation electrical architecture introduced on 2020+ models with PIVI Pro infotainment, featuring:
RFA EVA 2 Unlock SW40+ is exclusive to the HW04-C+ Master Kit. This cutting-edge function is not available on any other Lock50 model.
SW40 is ONLY used to unlock EVA2 RFA modules to erase keys WITHOUT swapping modules. Use this when you need to delete lost keys from the system but want to keep the original RFA.
Once the EVA2 RFA is unlocked, you can add new keys to the system via normal programming methods
Save time and money by unlocking the existing RFA instead of replacing it with a new module
If you need to copy keys or make spares, use SW36 which is designed for key duplication on locked RFA modules
L460 with PIVI Pro
L461 with PIVI Pro
L663 with PIVI Pro
Facelift with PIVI Pro
Facelift with PIVI Pro
Check if IMC is PIVI Pro
The ultimate Lock50 tool with SW40+ RFA EVA 2 Unlock, SW39+ IPC Reset, and unlimited access to all features. Perfect for professionals servicing the latest JLR vehicles.
Copy keys when RFA is locked - fastest method for spare keys on 2017+ vehicles
View SW36 GuideAdd OEM keys to locked RFA/BCM via service mode on EVA2 platform vehicles
View SW30 GuideDisable vehicle alarm with SW32/SW33 when programming with active security
View ARM OFFSW28 solution for programming keys with swapped RFA and locked BCM
View SW28 GuideHW13/HW14 keys used with SW36 function - 10 copies per key available
View Keys InfoDetailed comparison: SW30 vs SW36 vs SW40 - when to use each method
Compare AllImportant: SW40 does NOT work with active alarms. Use SW36 for all keys lost scenarios with alarm triggered.
Read Complete Function ComparisonWhy the SPC560B60L3 microcontroller in EVA 2 RFA modules has been considered unbreakable... until now
The SPC560B60L3 MCU uses AES-256 encryption with hardware-enforced security
Read-out protection prevents memory dumping or firmware extraction
JTAG and SWD interfaces completely locked out at chip level
Attempts to breach security trigger permanent memory erasure
Major aftermarket tool manufacturers have declared this MCU "impossible to unlock" - until Lock50 developed SW40+
All JLR vehicles from 2020 onwards using the new EVA 2 electronic architecture with enhanced security
Range Rover 2020+
Range Rover Sport
Defender 2020+
Discovery 2021+
Evoque 2020+
All Jaguar 2021+
SW40+ unlocks RFA EVA 2 modules paired with these Body Control Module variants
After years of research and development, Lock50 has achieved what the industry thought impossible - unlocking the SPC560B60L3 MCU in EVA 2 RFA modules using the revolutionary SW40+ function.
Full read/write access to RFA EVA 2 memory
Unlock completed in approximately 10 minutes
Non-destructive unlock preserves module integrity
No per-unlock fees with HW04-C+
HW04-C+ Master Kit with SW40+ - Exclusively from Lock50
When SW40 won't work (alarm active), consider these alternatives
Important: SW40 does NOT function when the vehicle alarm is armed. If you're dealing with an all-keys-lost scenario where the alarm is continuously triggering, you MUST use SW36 instead.
✓ SW36 works even when alarm is active
✗ SW40 requires alarm to be disarmed first
Unlock EVA2 RFA to erase lost keys without module swap. Only works when alarm is NOT active.
Copy keys when RFA is locked. Works even when alarm is active. Best for all-keys-lost scenarios with alarm.
Learn About SW36Add OEM keys via service mode on EVA2 vehicles. Requires InControl app or 2 working keys.
Learn About SW30If you need to disable the vehicle alarm system temporarily during key programming or diagnostics, explore our comprehensive ARM OFF guide covering SW32 and SW33 methods.
View ARM OFF Guide